https://www.phoenixcontact.com/gb/products/1776126
Printed-circuit board connector - MSTB 2,5/ 6-STZ-5,08 - 1776126
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Plug component, nominal current: 12 A, rated voltage (III/2): 320 V, number of positions: 6, pitch: 5.08 mm,
connection method: Screw connection with tension sleeve, Color: green, contact surface: Tin
The figure shows a 10-position
version of the product
Why buy this product
Plug-in direction parallel to the conductor axis
Standard plug-in system for 320 V (III/2)
Individual position coding by inserting coding profiles
Well-known connection principle allows worldwide use
Pull-out aid facilitates handling and allows the tensile force to be reduced at the contact point
Allows connection of two conductors
Key Commercial Data
Packing unit
50 STK
GTIN
GTIN
4017918038519
Weight per Piece (excluding packing)
11.170 g
Custom tariff number
85366990
Country of origin
Germany
Technical data
Dimensions
Width [ w ]
30.48 mm
Pitch
5.08 mm
Dimension a
25.4 mm
General
Range of articles
MSTB 2,5/..-STZ
Type of contact
Female connector
09/06/2017 Page 1 / 14
https://www.phoenixcontact.com/gb/products/1776126
Printed-circuit board connector - MSTB 2,5/ 6-STZ-5,08 - 1776126
Technical data
General
Number of positions
6
Connection method
Screw connection with tension sleeve
Insulating material group
I
Rated surge voltage (III/3)
4 kV
Rated surge voltage (III/2)
4 kV
Rated surge voltage (II/2)
4 kV
Rated voltage (III/3)
250 V
Rated voltage (III/2)
320 V
Rated voltage (II/2)
630 V
Connection in acc. with standard
EN-VDE
Nominal current IN
12 A
Nominal cross section
2.5 mm²
Maximum load current
12 A (with a 2.5 mm² conductor cross section)
Insulating material
PA
Flammability rating according to UL 94
V0
Internal cylindrical gage
A3
Stripping length
7 mm
Screw thread
M3
Tightening torque, min
0.5 Nm
Tightening torque max
0.6 Nm
Connection data
Conductor cross section solid min.
0.2 mm²
Conductor cross section solid max.
2.5 mm²
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible max.
2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max. 2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Conductor cross section AWG min.
24
Conductor cross section AWG max.
12
2 conductors with same cross section, solid min.
0.2 mm²
2 conductors with same cross section, solid max.
1 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, min.
0.25 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, max.
1 mm²
2 conductors with same cross section, stranded, TWIN ferrules with
plastic sleeve, min.
0.5 mm²
09/06/2017 Page 2 / 14
https://www.phoenixcontact.com/gb/products/1776126
Printed-circuit board connector - MSTB 2,5/ 6-STZ-5,08 - 1776126
Technical data
Connection data
2 conductors with same cross section, stranded, TWIN ferrules with
plastic sleeve, max.
1.5 mm²
Minimum AWG according to UL/CUL
30
Maximum AWG according to UL/CUL
12
Standards and Regulations
Connection in acc. with standard
EN-VDE
CSA
Flammability rating according to UL 94
V0
Environmental Product Compliance
China RoHS
Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”,
Category “Manufacturer's declaration”
Drawings
Dimensional drawing
53,5
39,5
a+5,08
8,3
The figure shows the dimensional drawing of the 5-position product version
Classifications
eCl@ss
eCl@ss 4.0
272607xx
eCl@ss 4.1
27260701
eCl@ss 5.0
27260701
eCl@ss 5.1
27260701
eCl@ss 6.0
27260704
eCl@ss 7.0
27440309
eCl@ss 8.0
27440309
eCl@ss 9.0
27440309
ETIM
ETIM 3.0
EC001121
ETIM 4.0
EC002638
09/06/2017 Page 3 / 14
https://www.phoenixcontact.com/gb/products/1776126
Printed-circuit board connector - MSTB 2,5/ 6-STZ-5,08 - 1776126
Classifications
ETIM
ETIM 5.0
EC002638
ETIM 6.0
EC002638
UNSPSC
UNSPSC 6.01
30211810
UNSPSC 7.0901
39121409
UNSPSC 11
39121409
UNSPSC 12.01
39121409
UNSPSC 13.2
39121409
Approvals
Approvals
Approvals
CSA / UL Recognized / VDE Gutachten mit Fertigungsüberwachung / cUL Recognized / IECEE CB Scheme / EAC / cULus Recognized
Ex Approvals
Approval details
CSA
13631
B
D
mm²/AWG/kcmil
28-12
28-12
Nominal current IN
15 A
10 A
Nominal voltage UN
300 V
300 V
UL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
B
D
mm²/AWG/kcmil
30-12
30-12
Nominal current IN
12 A
10 A
Nominal voltage UN
250 V
300 V
FILE E 60425
09/06/2017 Page 4 / 14
https://www.phoenixcontact.com/gb/products/1776126
Printed-circuit board connector - MSTB 2,5/ 6-STZ-5,08 - 1776126
Approvals
VDE Gutachten mit
Fertigungsüberwachung
http://www.vde.com/en/Institute/OnlineService/
VDE-approved-products/Pages/Online-Search.aspx
mm²/AWG/kcmil
0.2-2.5
Nominal current IN
12 A
Nominal voltage UN
250 V
cUL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
B
D
mm²/AWG/kcmil
30-12
30-12
Nominal current IN
12 A
10 A
Nominal voltage UN
250 V
300 V
IECEE CB Scheme
40004701
http://www.iecee.org/
mm²/AWG/kcmil
0.2-2.5
Nominal current IN
12 A
Nominal voltage UN
250 V
FILE E 60425
DE1-58978-B1B2
EAC
B.01742
cULus Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
Accessories
Accessories
Bridge
Insertion bridge - EBP 2- 5 - 1733169
Insertion bridge, fully insulated, for connectors with 5.0 or 5.08 mm pitch, no. of positions: 2
09/06/2017 Page 5 / 14
https://www.phoenixcontact.com/gb/products/1776126
Printed-circuit board connector - MSTB 2,5/ 6-STZ-5,08 - 1776126
Accessories
Coding element
Coding profile - CP-MSTB - 1734634
Coding profile, is inserted into the slot on the plug or inverted header, red insulating material
Labeled terminal marker
Marker card - SK 5,08/3,8:FORTL.ZAHLEN - 0804293
Marker card, Card, white, labeled, Horizontal: Consecutive numbers 1 - 10, 11 - 20, etc. up to 91 - (99)100, Mounting
type: adhesive, for terminal block width: 5.08 mm, Lettering field: 5.08 x 3.8 mm
Screwdriver tools
Screwdriver - SZS 0,6X3,5 - 1205053
Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100
mm, 2-component grip, with non-slip grip
Additional products
Base strip - MSTBW 2,5/ 6-G-5,08 - 1735840
Header, nominal current: 12 A, rated voltage (III/2): 320 V, number of positions: 6, pitch: 5.08 mm, Color: green,
contact surface: Tin, mounting: Wave soldering
Base strip - MSTBVA 2,5/ 6-G-5,08 - 1755778
Header, nominal current: 12 A, rated voltage (III/2): 320 V, number of positions: 6, pitch: 5.08 mm, Color: green,
contact surface: Tin, mounting: Wave soldering
09/06/2017 Page 6 / 14
https://www.phoenixcontact.com/gb/products/1776126
Printed-circuit board connector - MSTB 2,5/ 6-STZ-5,08 - 1776126
Accessories
Base strip - MSTBA 2,5/ 6-G-5,08 - 1757284
Header, nominal current: 12 A, rated voltage (III/2): 320 V, number of positions: 6, pitch: 5.08 mm, Color: green,
contact surface: Tin, mounting: Wave soldering
Base strip - MSTBV 2,5/ 6-G-5,08 - 1758050
Header, nominal current: 12 A, rated voltage (III/2): 320 V, number of positions: 6, pitch: 5.08 mm, Color: green,
contact surface: Tin, mounting: Wave soldering
Base strip - MSTB 2,5/ 6-G-5,08 - 1759059
Header, nominal current: 12 A, rated voltage (III/2): 320 V, number of positions: 6, pitch: 5.08 mm, Color: green,
contact surface: Tin, mounting: Wave soldering
Base strip - MDSTB 2,5/ 6-G1-5,08 - 1762415
Header, nominal current: 10 A, rated voltage (III/2): 320 V, number of positions: 6, pitch: 5.08 mm, Color: green,
contact surface: Tin, mounting: Wave soldering, In combination with MVSTB or FKCV plug components, both
an MVSTBW (or FKCVW) and an MVSTBR plug (or FKCVR) must be used. Combination with TMSTBP plug
components is not possible!
Base strip - MDSTBV 2,5/ 6-G1-5,08 - 1762541
Header, nominal current: 10 A, rated voltage (III/2): 320 V, number of positions: 6, pitch: 5.08 mm, Color: green,
contact surface: Tin, mounting: Wave soldering, In combination with MVSTB or FKCV plug components, both
an MVSTBW (or FKCVW) and an MVSTBR plug (or FKCVR) must be used. Combination with TMSTBP plug
components is not possible!
09/06/2017 Page 7 / 14
https://www.phoenixcontact.com/gb/products/1776126
Printed-circuit board connector - MSTB 2,5/ 6-STZ-5,08 - 1776126
Accessories
Base strip - SMSTBA 2,5/ 6-G-5,08 - 1767410
Header, nominal current: 12 A, rated voltage (III/2): 320 V, number of positions: 6, pitch: 5.08 mm, Color: green,
contact surface: Tin, mounting: Wave soldering
Base strip - SMSTB 2,5/ 6-G-5,08 - 1769502
Header, nominal current: 12 A, rated voltage (III/2): 320 V, number of positions: 6, pitch: 5.08 mm, Color: green,
contact surface: Tin, mounting: Wave soldering
Base strip - MSTBA 2,5/ 6-G-5,08-LA - 1770986
Header, nominal current: 12 A, rated voltage (III/2): 320 V, number of positions: 6, pitch: 5.08 mm, Color: green,
contact surface: Tin, mounting: Wave soldering
Base strip - MDSTBA 2,5/ 6-G-5,08 - 1842102
Header, nominal current: 10 A, rated voltage (III/2): 320 V, number of positions: 6, pitch: 5.08 mm, Color: green,
contact surface: Tin, mounting: Wave soldering, The article can be aligned to create different nos. of positions! In
combination with MVSTB or FKCV plug components, both an MVSTBW (or FKCVW) and an MVSTBR plug (or
FKCVR) must be used. Combination with TMSTBP plug components is not possible!
Base strip - MDSTBW 2,5/ 6-G-5,08 - 1842254
Header, nominal current: 10 A, rated voltage (III/2): 320 V, number of positions: 6, pitch: 5.08 mm, Color: green,
contact surface: Tin, mounting: Wave soldering, The article can be aligned to create different nos. of positions! In
combination with MVSTB or FKCV plug components, both an MVSTBW (or FKCVW) and an MVSTBR plug (or
FKCVR) must be used. Combination with TMSTBP plug components is not possible!
09/06/2017 Page 8 / 14
https://www.phoenixcontact.com/gb/products/1776126
Printed-circuit board connector - MSTB 2,5/ 6-STZ-5,08 - 1776126
Accessories
Housing - MDSTB 2,5/ 6-G-5,08 - 1844977
Header, nominal current: 10 A, rated voltage (III/2): 320 V, number of positions: 6, pitch: 5.08 mm, Color: green,
contact surface: Tin, mounting: Wave soldering, Can be aligned! Mounting flange: Order No. 1736771, 1736768.
In combination with MVSTB or FKCV plug components, both an MVSTBW (or FKCVW) and an MVSTBR plug (or
FKCVR) must be used. Combination with TMSTBP plug components is not possible!
Base strip - MDSTBVA 2,5/ 6-G-5,08 - 1845374
Header, nominal current: 10 A, rated voltage (III/2): 320 V, number of positions: 6, pitch: 5.08 mm, Color: green,
contact surface: Tin, mounting: Wave soldering, The article can be aligned to create different nos. of positions! In
combination with MVSTB or FKCV plug components, both an MVSTBW (or FKCVW) and an MVSTBR plug (or
FKCVR) must be used. Combination with TMSTBP plug components is not possible!
Base strip - MDSTBV 2,5/ 6-G-5,08 - 1845523
Header, nominal current: 10 A, rated voltage (III/2): 320 V, number of positions: 6, pitch: 5.08 mm, Color: green,
contact surface: Tin, mounting: Wave soldering, Can be aligned! Mounting flange: Order No. 1836477, 1836480.
In combination with MVSTB or FKCV plug components, both an MVSTBW (or FKCVW) and an MVSTBR plug (or
FKCVR) must be used. Combination with TMSTBP plug components is not possible!
Base strip - MSTBO 2,5/ 6-GR-5,08 - 1847149
Header, nominal current: 8 A, rated voltage (III/2): 320 V, number of positions: 6, pitch: 5.08 mm, Color: green,
contact surface: Tin, mounting: Wave soldering
Base strip - MSTBO 2,5/ 6-GL-5,08 - 1850479
Header, nominal current: 8 A, rated voltage (III/2): 320 V, number of positions: 6, pitch: 5.08 mm, Color: green,
contact surface: Tin, mounting: Wave soldering
09/06/2017 Page 9 / 14
https://www.phoenixcontact.com/gb/products/1776126
Printed-circuit board connector - MSTB 2,5/ 6-STZ-5,08 - 1776126
Accessories
Base strip - EMSTBVA 2,5/ 6-G-5,08 - 1859551
Header, nominal current: 12 A, rated voltage (III/2): 320 V, number of positions: 6, pitch: 5.08 mm, Color: green,
contact surface: Tin, mounting: Press-in technology
Base strip - EMSTBA 2,5/ 6-G-5,08 - 1880342
Header, nominal current: 12 A, rated voltage (III/2): 320 V, number of positions: 6, pitch: 5.08 mm, Color: green,
contact surface: Tin, mounting: Press-in technology
Base strip - DFK-MSTBA 2,5/ 6-G-5,08 - 1898871
Header, nominal current: 12 A, rated voltage (III/2): 320 V, number of positions: 6, pitch: 5.08 mm, Color: green,
contact surface: Tin, mounting: Wave soldering
Base strip - DFK-MSTBVA 2,5/ 6-G-5,08 - 1899171
Header, nominal current: 12 A, rated voltage (III/2): 320 V, number of positions: 6, pitch: 5.08 mm, Color: green,
contact surface: Tin, mounting: Wave soldering
Printed-circuit board connector - MSTBA 2,5/ 6-G-5,08 THT - 1902783
Header, nominal current: 12 A, rated voltage (III/2): 320 V, number of positions: 6, pitch: 5.08 mm, Color: black,
contact surface: Tin, mounting: THR soldering, User information and design recommendations for through hole reflow
technology can be found under “Downloads”
09/06/2017 Page 10 / 14
https://www.phoenixcontact.com/gb/products/1776126
Printed-circuit board connector - MSTB 2,5/ 6-STZ-5,08 - 1776126
Accessories
Base strip - MSTBVA 2,5/ 6-G-5,08 THT - 1902851
Header, nominal current: 12 A, rated voltage (III/2): 320 V, number of positions: 6, pitch: 5.08 mm, Color: black,
contact surface: Tin, mounting: THR soldering, User information and design recommendations for through hole reflow
technology can be found under “Downloads”
Printed-circuit board connector - MSTBA 2,5/ 6-G-5,08 THT-R56 - 1937279
Header, nominal current: 12 A, rated voltage (III/2): 320 V, number of positions: 6, pitch: 5.08 mm, Color: black,
contact surface: Tin, mounting: THR soldering, User information and design recommendations for through hole reflow
technology can be found under “Downloads”
Base strip - MSTBVA 2,5/ 6-G-5,08 THT-R56 - 1940457
Header, nominal current: 12 A, rated voltage (III/2): 320 V, number of positions: 6, pitch: 5.08 mm, Color: black,
contact surface: Tin, mounting: THR soldering, User information and design recommendations for through hole reflow
technology can be found under “Downloads”
Printed-circuit board connector - CC 2,5/ 6-G-5,08 P26THR - 1954511
Header, nominal current: 12 A, rated voltage (III/2): 320 V, number of positions: 6, pitch: 5.08 mm, Color: black,
contact surface: Tin, mounting: THR soldering, User information and design recommendations for through hole reflow
technology can be found under “Downloads”
Printed-circuit board connector - CC 2,5/ 6-G-5,08 P26THRR56 - 1954621
Header, nominal current: 12 A, rated voltage (III/2): 320 V, number of positions: 6, pitch: 5.08 mm, Color: black,
contact surface: Tin, mounting: THR soldering, User information and design recommendations for through hole reflow
technology can be found under “Downloads”
09/06/2017 Page 11 / 14
https://www.phoenixcontact.com/gb/products/1776126
Printed-circuit board connector - MSTB 2,5/ 6-STZ-5,08 - 1776126
Accessories
Printed-circuit board connector - CCA 2,5/ 6-G-5,08 P26THR - 1954951
Header, nominal current: 12 A, rated voltage (III/2): 320 V, number of positions: 6, pitch: 5.08 mm, Color: black,
contact surface: Tin, mounting: THR soldering, User information and design recommendations for through hole reflow
technology can be found under “Downloads”
Printed-circuit board connector - CCA 2,5/ 6-G-5,08 P26THRR56 - 1955073
Header, nominal current: 12 A, rated voltage (III/2): 320 V, number of positions: 6, pitch: 5.08 mm, Color: black,
contact surface: Tin, mounting: THR soldering, User information and design recommendations for through hole reflow
technology can be found under “Downloads”
Printed-circuit board connector - CCV 2,5/ 6-G-5,08 P26THR - 1955426
Header, nominal current: 12 A, rated voltage (III/2): 320 V, number of positions: 6, pitch: 5.08 mm, Color: black,
contact surface: Tin, mounting: THR soldering, User information and design recommendations for through hole reflow
technology can be found under “Downloads”
Printed-circuit board connector - CCV 2,5/ 6-G-5,08 P26THRR56 - 1955565
Header, nominal current: 12 A, rated voltage (III/2): 320 V, number of positions: 6, pitch: 5.08 mm, Color: black,
contact surface: Tin, mounting: THR soldering, User information and design recommendations for through hole reflow
technology can be found under “Downloads”
Printed-circuit board connector - CCVA 2,5/ 6-G-5,08 P26THR - 1955895
Header, nominal current: 12 A, rated voltage (III/2): 320 V, number of positions: 6, pitch: 5.08 mm, Color: black,
contact surface: Tin, mounting: THR soldering, User information and design recommendations for through hole reflow
technology can be found under “Downloads”
09/06/2017 Page 12 / 14
https://www.phoenixcontact.com/gb/products/1776126
Printed-circuit board connector - MSTB 2,5/ 6-STZ-5,08 - 1776126
Accessories
Printed-circuit board connector - CCVA 2,5/ 6-G-5,08 P26THRR56 - 1956001
Header, nominal current: 12 A, rated voltage (III/2): 320 V, number of positions: 6, pitch: 5.08 mm, Color: black,
contact surface: Tin, mounting: THR soldering, User information and design recommendations for through hole reflow
technology can be found under “Downloads”
Printed-circuit board connector - CCA 2,5/ 6-GL-5,08P26THR - 1959105
Header, nominal current: 12 A, rated voltage (III/2): 320 V, number of positions: 6, pitch: 5.08 mm, Color: black,
contact surface: Tin, mounting: THR soldering, Two-in-one – Pin strips must always be made up of a left (L) and a
right (R) segment. Please allow for the corresponding counterpart from the accessories to complete the THR pin strip.
Printed-circuit board connector - CCA 2,5/ 6-GR-5,08P26THR - 1959244
Header, nominal current: 12 A, rated voltage (III/2): 320 V, number of positions: 6, pitch: 5.08 mm, Color: black,
contact surface: Tin, mounting: THR soldering, Two-in-one – Pin strips must always be made up of a left (L) and a
right (R) segment. Please allow for the corresponding counterpart from the accessories to complete the THR pin strip.
Printed-circuit board connector - CCVA 2,5/ 6-GL-5,08P26THR - 1959943
Header, nominal current: 12 A, rated voltage (III/2): 320 V, number of positions: 6, pitch: 5.08 mm, Color: black,
contact surface: Tin, mounting: THR soldering, Two-in-one – Pin strips must always be made up of a left (L) and a
right (R) segment. Please allow for the corresponding counterpart from the accessories to complete the THR pin strip.
Printed-circuit board connector - CCVA 2,5/ 6-GL-5,08P26THRR56 - 1960042
Header, nominal current: 12 A, rated voltage (III/2): 320 V, number of positions: 6, pitch: 5.08 mm, Color: black,
contact surface: Tin, mounting: THR soldering, Two-in-one – Pin strips must always be made up of a left (L) and a
right (R) segment. Please allow for the corresponding counterpart from the accessories to complete the THR pin strip.
09/06/2017 Page 13 / 14
https://www.phoenixcontact.com/gb/products/1776126
Printed-circuit board connector - MSTB 2,5/ 6-STZ-5,08 - 1776126
Accessories
Printed-circuit board connector - CCVA 2,5/ 6-GR-5,08P26THR - 1960123
Header, nominal current: 12 A, rated voltage (III/2): 320 V, number of positions: 6, pitch: 5.08 mm, Color: black,
contact surface: Tin, mounting: THR soldering, Two-in-one – Pin strips must always be made up of a left (L) and a
right (R) segment. Please allow for the corresponding counterpart from the accessories to complete the THR pin strip.
Phoenix Contact 2017 © - all rights reserved
http://www.phoenixcontact.com
09/06/2017 Page 14 / 14
